Daikin FDMQ-R Series Скачать руководство пользователя страница 440

Страница: 440 / 484

438

FTX-N/U, FVXS-N, FDMQ-R Series EDUS091558E

3P124623-5C

CAUTION

After a long use, check the unit stand and

fitting for damage.

If they are left in a damaged condition, the

unit may fall and result in injury.

Do not allow a child to mount on the unit

or avoid placing any object on it.

Falling or tumbling may result in injury.

Do not let children play on and around

the unit.

If they touch the unit carelessly, it may result

in injury.

Do not place a flower vase and anything

containing water.

Water may enter the unit, causing an electric

shock or fire.

Never touch the internal parts of the con-

troller.

Do not remove the front panel. Some parts

inside are dangerous to touch, and a

machine trouble may happen.

For checking and adjusting the internal

parts, contact your dealer.

Avoid placing the controller in a spot

splashed with water.

Water coming inside the machine may cause

an electric leak or may damage the internal

electronic parts.

Do not operate the air conditioner when

using a room fumigation - type insecticide.

Failure to observe could cause the chemi-

cals to become deposited in the unit, which

could endanger the health of those who are

hypersensitive to chemicals.

Safely dispose of the packing materials.

Packing materials, such as nails and other

metal or wooden parts, may cause stabs or

other injuries.

Tear apart and throw away plastic packaging

bags so that children will not play with them. If

children play with a plastic bag which was not

torn apart, they face the risk of suffocation.

Do not turn off the power immediately

after stopping operation.

Always wait at least five minutes before turn-

ing off the power. Otherwise, water leakage

and trouble may occur.

The appliance is not intended for use by

young children or infirm persons without

supervision.
The remote controller should be installed

in such away that children cannot play

with it.

NOTE

Never press the button of the remote con-

troller with a hard, pointed object.

The remote controller may be damaged.

Never pull or twist the electric wire of the

remote controller.

It may cause the unit to malfunction.

Do not place the controller exposed to

direct sunlight.

The LCD display may get discolored, failing

to display the data.

Do not wipe the controller operation

panel with benzine, thinner, chemical

dustcloth, etc.

The panel may get discolored or the coating

peeled off. If it is heavily dirty, soak a cloth in

water-diluted neutral detergent, squeeze it

well and wipe the panel clean. And wipe it

with another dry cloth.

Dismantling of the unit, treatment of the

refrigerant, oil and eventual other parts,

should be done in accordance with the

relevant local and national regulations.

Содержание FDMQ-R Series




































































































































































































































































































































































































































































































Результаты поиска

Содержание FDMQ-R Series

Отзывы:

Похожие инструкции для FDMQ-R Series

Бренды по названию

Популярные бренды

Daikin FDMQ-R Series, Руководство пользователя

Результаты поиска

Содержание FDMQ-R Series

Отзывы:

Похожие инструкции для FDMQ-R Series

Бренды по названию

Популярные бренды