Daikin FDMQ-R Series Скачать руководство пользователя страница 119

Страница: 119 / 484

FTX-N/U, FVXS-N, FDMQ-R Series EDUS091558E

117

3P500432-1

•

The refrigerant is pre-charged in the outdoor unit.

Torque wrench

Piping union

Flare nut

Spanner

Tighten

Fig. 9

Do not apply refrigeration

oil to the outer surface.

Flare nut

Apply refrigeration

oil only to the inner

surface of the ﬂare.

Do not apply refrigeration oil to

the ﬂare nut to avoid tightening

with excessive torque.

Apply oil

Fig. 10

CAUTION

Do not have oil adhere to the screw fixing part of resin

parts.

If oil adheres, it may weaken the strength of screwed part.

Do not tighten flare nuts too tight.

If a ﬂare nut cracks, the refrigerant may leak.

Insulation of field piping must be carried out up to the

connection inside the casing.

If the piping is exposed to the atmosphere, it may cause
sweating, burn due to touching the piping, electric shock or a

fire due to the wiring touching the piping.

•

After leak test, referring to

Fig. 11

, insulate both the gas and

liquid piping connection with the attached fitting insulation

(4) and (5) to prevent the pipings from getting exposed.
Then, tighten both the ends of insulating material with the clamp (8).

•

Wrap the sealing pad (Medium) (7) around the fitting insulation
(4) and (5) (ﬂare nut section), both the gas and liquid piping.

•

Make sure to bring the seam of fitting insulation (4) and (5)

to the top.

Gas piping

Liquid piping

Fitting

insulation (4)

Liquid Piping Insulation Procedure

Unit

Clamp (8)

Piping

insulating

material

(field supply)

Gas Piping Insulation Procedure

Fitting

insulation (5)

Piping insulating

material (unit)

Bring the

seam

to the top.

Flare nut

connection

Piping

insulating

material

(field supply)

Do not leave

clearance.

Flare nut

connection

Bring the

seam

to the top.

Do not leave

clearance.

Piping insulating

material (unit)

Wind around the

piping until top of the

ﬂare nut connection,

beginning at the base.

Do not expose the

piping in order to

prevent the vapor

condensation.

Tighten the portion

where overlapped by

the piping insulating

material.

Tighten the portion

where overlapped by

the piping insulating

material.

Do not expose the

piping in order to

prevent the vapor

condensation.

Wind around the

piping, beginning

at the base.

Sealing pad

(Medium) (7)

Sealing pad

(Medium) (7)

Fig. 11

NOTE

In case of refrigerant shortage due to forgetting additional
refrigerant charge etc., it will result in malfunc tion such as
does not cool or does not heat.
Refer to the outdoor unit installation manual or technical
document for refrigerant piping.

01_EN_3P500432-1.indd 8

10/24/2017 18:32:33

Содержание FDMQ-R Series




































































































































































































































































































































































































































































































Результаты поиска

Содержание FDMQ-R Series

Отзывы:

Похожие инструкции для FDMQ-R Series

Бренды по названию

Популярные бренды

Daikin FDMQ-R Series, Руководство пользователя

Результаты поиска

Содержание FDMQ-R Series

Отзывы:

Похожие инструкции для FDMQ-R Series

Бренды по названию

Популярные бренды