manualshive.com logo in svg

Daikin FDMQ-R Series, Руководство пользователя

Серия продуктов Daikin FDMQ-R предлагает пользовательские руководства для бесплатного скачивания. Узнайте как монтаж и обслуживание вашего оборудования с помощью наших подробных инструкций. Скачайте руководство с нашего сайта manualshive.com уже сегодня и наслаждайтесь эффективностью работы вашей системы от Daikin.

Поделиться
Скачать
background image

350

FTX-N/U, FVXS-N, FDMQ-R Series EDUS091558E

3P510048-1A

9

„

 

Group control system

1 remote controller controls up to 16 indoor units.
All indoor units are equally set.

„

 

2 remote controllers control system

2 remote controllers control 1 indoor unit.
(In case of group control system, 1 group of indoor units)
The unit follows individual operation.

NOTE

• Cannot have 2 remote controllers control system with only wire-

less remote controllers. (It will be a 2 remote controllers control 
system having 1 wired and 1 wireless remote controllers.)

• Under 2 remote controllers control system, wireless remote 

controller cannot control timer operation.

• Only the operating indicator lamp out of 3 other lamps on the 

indoor unit display functions.

• Contact your dealer in case of changing the combination or set-

ting of group control and 2 remote controllers control systems.

The following symptoms do not indicate air condi-
tioner malfunction.

„

 

THE SYSTEM DOES NOT OPERATE

• The system does not restart immediately after the ON/

OFF button is pressed.

If the OPERATING INDICATOR lamp lights, the system is in 
normal condition. It does not restart immediately because a 
safety device operates to prevent overload of the system. 
After 3 minutes, the system will turn on again automatically.

• The system does not restart immediately when TEM-

PERATURE SETTING button is returned to the former 
position after pushing the button.

It does not restart immediately because a safety device oper-
ates to prevent overload of the system. After 3 minutes, the 
system will turn on again automatically.

• If the reception beep is rapidly repeated 3 times.

(It sounds only 2 times when operating normally.)

Control is set to the optional controller for centralized control.

• If the DEFROST lamp on the indoor unit’s display is lit 

when heating is started.

This indication is to warn against cold air being blown from 
the unit. There is nothing wrong with the equipment.

„

 

The unit stops operation from time to time.

• With “U4” “U5” displayed on the remote controller, the 

unit stops, but it resumes operation in a few minutes.

Since electric noises produced from other equipment than 
the air conditioner interrupt communication between the 
units, the unit stops operation.
If these electric noises subside, operation is restarted auto-
matically.

„

 

COOLING / HEATING changeover is impossible.

• If the indoor unit emits a receiving sound “1 long beep”.

It is because the indoor unit under the control of operation 
changeover is set to the mode that cannot be selected.

„

 

Display Indicates only a part.

• Even if the unit is in operation, the display shows only 

operational indication.  Even if the indication is shown, the 
indication other than operation disappears after a while.

It is because the remote controller is set to multi-system.

„

 

Display disappears or shows all indication.

• It happens when the button of the remote controller is 

pressed.

It is because the battery is dead.

„

 

No favorable cooling is achieved.

• The unit is in DRY OPERATION.

DRY OPERATION is carried out to perform operation such that 
the room temperature is not decreased as much as possible.

„

 

EMERGENCY STOP

When the air conditioner stops in emergency, the run lamp on 
the indoor unit starts blinking. Take the following steps yourself 
to read the malfunction code that appears on the display. Con-
tact your dealer with this code. It will help pinpoint the cause of 
the trouble, speeding up the repair.

Press the INSPECTION/TEST OPERATION button to 
select the inspection mode “   ”.

“

 

 ” appears on display and blinks. “UNIT No.” lights up.

Press PROGRAMMING TIMER button and change the 
unit number.

Press to change the unit number until the indoor unit beeps and 
perform the following operation according to the number of beeps.

Number of beeps

3 short beeps........... Perform all steps from 

 to 

.

1 short beep............. Perform 

 and 

 steps.

1 long beep .............. Normal state

5. NOT MALFUNCTION OF THE AIR 

CONDITIONER

6. HOW TO DIAGNOSE TROUBLE SPOTS

UNIT N

O

.

CODE

MODE

TIMER

RESERVE CANCEL

DOWN

UP

/TEST

FAN

TIME

TEMP

1

2 4

6

3 5

7

ON OFF

2 4

6

 TEST

1

DOWN

UP

2

3

6

3

6

01_EN_3P510048-1A.fm  Page 9  Wednesday, December 27, 2017  2:27 AM

Содержание FDMQ-R Series





































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для FDMQ-R Series

ABB PVS-100 Series Hardware Manual preview
PVS-100 Series
Бренд: ABB Страницы: 70
JED 103 Installation And Operation Manual preview
103
Бренд: JED Страницы: 4
Datavideo DAC-100 Supplementary Manual preview
DAC-100
Бренд: Datavideo Страницы: 13
Danfoss VLT 6000 Unpacking And Installation Instructions preview
VLT 6000
Бренд: Danfoss Страницы: 6
Danfoss VLT 5000 Series Quick Setup Manual preview
VLT 5000 Series
Бренд: Danfoss Страницы: 59
Peak Genius 1022 Installation Manual preview
Genius 1022
Бренд: Peak Страницы: 8
Baum 22090 Installation And Operating Instructions Manual preview
22090
Бренд: Baum Страницы: 32
Delta SOLIVIA 2.5 AP G3 TR Operation And Installation Manual preview
SOLIVIA 2.5 AP G3 TR
Бренд: Delta Страницы: 48
OXO NetBox MS Instruction Manual preview
NetBox MS
Бренд: OXO Страницы: 20
Aksa ALP 10-6 Installation & Operation Manual preview
ALP 10-6
Бренд: Aksa Страницы: 50
DK-Technologies PT5300 Manual To Installation And Operation preview
PT5300
Бренд: DK-Technologies Страницы: 90
OT Systems FT210AB Series Installation And Operation Manual preview
FT210AB Series
Бренд: OT Systems Страницы: 16
MAER IDROPULITRICI BYTURBO Instruction Manual preview
BYTURBO
Бренд: MAER IDROPULITRICI Страницы: 13
Optical Systems OSD2052P Operator'S Manual preview
OSD2052P
Бренд: Optical Systems Страницы: 2
Patton electronics 2035-25M User Manual preview
2035-25M
Бренд: Patton electronics Страницы: 7
Sencore MRD 7000 User Manual preview
MRD 7000
Бренд: Sencore Страницы: 126
PRIZM Video 3 User'S Manual And Troubleshooting Manual preview
Video 3
Бренд: PRIZM Страницы: 7
LogicLadder EnergyLogicIQ Instruction Manual preview
EnergyLogicIQ
Бренд: LogicLadder Страницы: 55

Бренды по названию

Популярные бренды

Загрузить еще бренды