Daikin FDMQ-R Series Скачать руководство пользователя страница 409

Страница: 409 / 484

FTX-N/U, FVXS-N, FDMQ-R Series EDUS091558E

407

3P124623-1E

Select the desired timer number by

pressing the “TIMER NO.” button.

Once the desired timer number is

displayed,

press the “SET”

button.

The display for timer number 2

will stop blinking.

The “

” display will disappear

after 3 seconds.
Select “ ” in the timer number when you do not

wish to set a timer number.

It is possible to set only one timer number.

(The times for turning the unit(s) on and off twice a

day can be set with a single timer number.)

• Timer Number Setting

Group control: select the unit in the individual

screen and set the timer number.

Batch control: set the timer numbers for all con-

nected units.

Zone control: set the timer numbers for all

zone-registered units.

Call up the zones which you wish

to set in the zone screen and set

the timer numbers.

• Since the timer number will be set to after-

press priority, the timer number in the last

screen set will be valid for the connected

units.

Example 1

Setting timer number 1 for unit 1-00 to “1” and

timer number 2 to “2” in the individual screen and

then setting timer number 1 to “3” and timer

number 2 to “4” in the batch screen causes the

timer numbers for all units to be set, so timer

number 1 for unit 1-00 will be “3” and timer num-

ber 2 will be “4”.
Example 2

To prevent leaving units on, timer number 1 is

set to “5” in the batch screen.

Setting timer number 1 in zone number 1 to “ ”

in the zone screen after that will change the

timer number for zone number 1, so the setting

to prevent leaving the units on will be lost for

zone number 1 only.
If a timer number is set incorrectly by accident,

redo the setting in the desired screen.

• What happens when the timer number on

time and off time are set to the same time

When the on time and off time are set to the

same time for the same timer number, operation

does not change.

When the on time and off time are set to the

same time for different timer numbers, the off

time is given priority.

When using timer operation, make sure the

times do not overlap when setting the program of

the schedule timer.

Setting the Operation Code (Fig. 11)

[Registration]

Pressing the “CONTROL MODE”

button causes the currently set operation

code to blink.

Call up the desired code number by pressing the

“CONTROL MODE” button.

Scroll through the code numbers.

Once the code number is displayed,

press the “SET” button.

The display will stop blinking.

The operation code display will disappear after

3 seconds.

[The Operation Code Setting]

Group control: select the unit in the individual screen

and set the operation code.

Batch control: set the operation code for all con-

nected units.

Zone control: set the operation code for all zone-reg-

istered units.

Call up the zones which you wish to set

in the zone screen and set the opera-

tion code.

Since the operation code will be set for after-press pri-

ority, setting the operation code in the zone and individ-

ual screens after setting the operation code in the

batch screen, will cause the operation codes set after-

wards to be valid.

No.

Содержание FDMQ-R Series




































































































































































































































































































































































































































































































Результаты поиска

Содержание FDMQ-R Series

Отзывы:

Похожие инструкции для FDMQ-R Series

Бренды по названию

Популярные бренды

Daikin FDMQ-R Series, Руководство пользователя

Результаты поиска

Содержание FDMQ-R Series

Отзывы:

Похожие инструкции для FDMQ-R Series

Бренды по названию

Популярные бренды