Daikin BRC2E52C7 Скачать руководство пользователя страница 5

Страница: 5 / 64

BRC2E52C7 / BRC3E52C7

Operation manual

4P368042-1 - 2014.02

Items to be Strictly Observed

WARNING

•

In the case of using a load breaker provided with a fuse, make sure that

the capacity of the fuse is correct.

Use of an ordinary conductive wire may cause malfunctions or fire.

• Do not use the power supply breaker to start or stop the air conditioner.

Otherwise, fire or water leakage may result.

Furthermore, the fan will rotate abruptly if power failure compensation is enabled, which

may result in injury.

• Be sure to earth the unit.

Do not earth the unit to a utility pipe, lightning conductor or telephone earth lead.

Imperfect earthing may result in electric shocks or fire. A high surge current from

lightning or other sources may cause damage to the air conditioner.

•

When the air conditioner is malfunctioning (giving off a burning odour,

etc). turn off the power and contact your local dealer.

Continued operation under such circumstances may result in a failure, electric shocks or

fire hazards.

• Consult your local dealer regarding what to do in case of refrigerant

leakage.

When the air conditioner is to be installed in a small room, it is necessary to take proper

measures so that the amount of any leaked refrigerant does not exceed the

concentration limit in the event of a leakage.

Otherwise, this may lead to an accident due to oxygen depletion.

• Be sure to install an earth leakage breaker.

Failure to install an earth leakage breaker may result in electric shocks or fire.

• Consult the dealer if the air conditioner submerges owing to a natural

disaster such as a flood or typhoon.

Do not operate the air conditioner in that case or otherwise a malfunction, electric shock

or fire may result.

• Be sure to use a dedicated power supply for the air conditioner.

The use of any other power supply may cause heat generation, fire or product failures.

Содержание BRC2E52C7
































































Результаты поиска

Содержание BRC2E52C7

Отзывы:

Похожие инструкции для BRC2E52C7

Бренды по названию

Популярные бренды

Daikin BRC2E52C7, Руководство по эксплуатации

Результаты поиска

Содержание BRC2E52C7

Отзывы:

Похожие инструкции для BRC2E52C7

Бренды по названию

Популярные бренды