Daikin BRC2E52C7, Руководство по эксплуатации

Страница: 12 / 64

Operation manual BRC2E52C7 / BRC3E52C7
11
4P368042-1 - 2014.02
Names and Functions
8. Ventilation/Purifying
(See "Ventilation Operation" on
page 18 and "Ventilation" on
page 33 )
• The Ventilation mode icon." "
Indicate the current ventilation mode (HRV
only) (AUTOMATIC, ENERGY RECLAIM
VENTILATION, BYPASS).
• The Air Purifying ICON " "
This icon indicates that the air cleaning
option kit is operational.
9. Timer enabled " "
(See "OFF Timer" on page 42 and
"Schedule" on page 44 ).
• Indicates that the schedule timer or the
OFF timer is enabled.
10. Emergency operation " "
• If there is a problem with an outdoor
compressor, the unit is in emergency
operation. Refer to the service manual of
the outdoor unit or contact your local
dealer.
11. Low noise operation/power
consumption limitation/forced
thermo off
(BACnet ) " "
•
Indicates that the system is running under
low noise operation, under power
consumption limitation conditions or recieve
a forced thermo off command from a
BACnet interface. Refer to the service
manual of the outdoor unit or contact your
local dealer.
12. Under Centralized control " "
• Indicates that the air conditioner is under
the management of central control
equipment (optional accessories) and the
operation of the system through the remote
controller is prohibited.
13. Changeover under control " "
(VRV only) (See "Setting the Cooling/
Heating Selection Eligibility" on
page 19
)
• Indicates that the changeover of the
cooling/heating eligibility is assigned to
another indoor unit or to the master remote
controller.
14. Setback " "
(See "Setback" on page 17 ).
• The setback icon flashes when the unit is
turned on under the setback control.
15. Clock
(12/24 hours real time clock)
(See "Clock & Calendar" on page 55 )
• Indicates that the clock is set.
•
If the clock is not set, " -- : -- " will be
displayed.
16. Detailed selection
(See "Display Mode" on page 52 )
•
Is displayed when the detailed display
mode is selected.
• No detailed items are selected by default.
17. Timer problem " "
• Indicates that the clock needs to be set
again.
• The schedule timer function will not work
unless the clock is set again.