Daikin BRC2E52C7 Скачать руководство пользователя страница 14

Страница: 14 / 64

Operation manual

BRC2E52C7 / BRC3E52C7

4P368042-1 - 2014.02

Basic Operation Method

(SkyAir and VRV)

Cool/Heat/Auto/Fan Operation

°C

• Press the Operation Mode Selector button several

times until the desired mode (Cooling, Heating, Fan

Only, Dry or Auto) is selected.

Note

• Unavailable operation modes are not displayed.

• Only Cooling, Dry or Fan Only mode can be selected if the air

conditioner is a cooling-only model.

• Before making a mode change, make sure that Changeover

under control is not displayed on the remote controller.

The cooling or heating mode cannot be selected if the above is

displayed on the remote controller. See

"Setting the Cooling/

Heating Selection Eligibility" on page 19

if the Changeover

under control icon blinks.

• Press the ON/OFF button.

The Operation lamp (green) will be lit and the air

conditioner will start operating.

°C

• The set temperature will increase by 1°C

when the (Up) button is pressed and

decrease by 1°C when the (Down) button

is pressed.

Note

Temperature settings are not possible while in Dry or Fan Only

mode.

°C

• To change the fan speed, press the Fan Speed

button.

Operation Method

Содержание BRC2E52C7
































































Результаты поиска

Содержание BRC2E52C7

Отзывы:

Похожие инструкции для BRC2E52C7

Бренды по названию

Популярные бренды

Daikin BRC2E52C7, Руководство по эксплуатации

Результаты поиска

Содержание BRC2E52C7

Отзывы:

Похожие инструкции для BRC2E52C7

Бренды по названию

Популярные бренды