Daikin BRC2E52C7 Скачать руководство пользователя страница 20

Страница: 20 / 64

Operation manual

BRC2E52C7 / BRC3E52C7

4P368042-1 - 2014.02

Basic Operation Method

• Press the ON/OFF button.

The Operation lamp will be lit and the Heat

Reclaim Ventilation unit will start operating.

• When the ON/OFF button is pressed again the

Heat Reclaim Ventilation will stop operating and

the Operation lamp will turn OFF.

Setting the Cooling/Heating Selection Eligibility

(VRV only)

Setting Changes

See

"Cool/Heat Selection Eligibility" on page 21

for an explanation of the

cooling/heating selection eglibility.

°C

• Press the Operation Mode Selector button on the

remote controller for at least 4 seconds. (During

backlight lit)

The remote controller will not display "

(Changeover under control) if a cooling/heating

selection eligibility is granted to the remote

controller.

• The icon "

" (Changeover under control) on each remote

controller of indoor units connected to the same outdoor unit or

BS (Branch Selection) box will start blinking.

• Set a cooling/heating selection eligibility as explained below.

Note

• Ventilation mode changes are possible regardless of the cooling/

heating selection eligibility.

• If a cooling/heating selection eligibility is set in the "cooling/

heating selection remote controller" ( ), the other remote

controllers will display "

" (Changeover under control). In this

case, the operation mode cannot be changed to respectively

cooling or heating when heating or cooling is set on the "cooling

or heating selection remote controller".

Refer to the Operation Manual provided to the outdoor unit for

the details on the "cooling/heating selection remote controller".

Содержание BRC2E52C7
































































Результаты поиска

Содержание BRC2E52C7

Отзывы:

Похожие инструкции для BRC2E52C7

Бренды по названию

Популярные бренды

Daikin BRC2E52C7, Руководство по эксплуатации

Результаты поиска

Содержание BRC2E52C7

Отзывы:

Похожие инструкции для BRC2E52C7

Бренды по названию

Популярные бренды