Daikin BRC2E52C7 Скачать руководство пользователя страница 17

Страница: 17 / 64

BRC2E52C7 / BRC3E52C7

Operation manual

4P368042-1 - 2014.02

Basic Operation Method

Program Dry Operation

Preparation

• For mechanical protection purposes, turn ON the air conditioner at least 6 hours before

starting the operation of the air conditioner.

• Do not turn OFF the air conditioner in season in order to ensure the smooth starting of the air

conditioner.

• The dry mode may not be selected if the remote controller has no eligibility to select cooling/

heating mode (See

"Setting the Cooling/Heating Selection Eligibility" on page 19

for

details).

• Press the Operation Mode Selector button several

times until Dry mode is selected.

Note

Dry mode may not be available depending on the type of indoor

unit.

• Press the ON/OFF button.

The Operation lamp will be lit and the air

conditioner will start operating.

Note

The air conditioner is in automatic temperature and fan speed

control. Therefore, the temperature or fan speed cannot be

changed while the air conditioner is in operation.

•

To set the airflow direction, see

"Airflow Direction" on page 28

• When the ON/OFF button is pressed again, the air

conditioner will stop operating and the Operation

lamp will turn OFF

Note

To prevent water leakage or system failure, do not turn OFF the

power soon after the air conditioner stops operating. Be sure to

wait at least 5 minutes so that the drain pump finishes discharging

the residual water from the indoor unit.

Operation Method

Содержание BRC2E52C7
































































Результаты поиска

Содержание BRC2E52C7

Отзывы:

Похожие инструкции для BRC2E52C7

Бренды по названию

Популярные бренды

Daikin BRC2E52C7, Руководство по эксплуатации

Результаты поиска

Содержание BRC2E52C7

Отзывы:

Похожие инструкции для BRC2E52C7

Бренды по названию

Популярные бренды