Operation Manual
ED72-975
22
BRC1E61
6.4
Quick Reference of Main Menu Items
3P243520-1
English
25
Setting and display items
Description
Reference page
Convenient
functions
Contrast adjustment
Used to make LCD contrast adjustment.
45
Display changeover
Standard or detailed
display
Used to set to standard or detailed display
mode.
Display
Ɣ
Standard or detailed display
Detailed display settings
Ɣ
Selectable from the display room
temperature, outdoor temperature, system, or
without any display items.
46
Setting status list
Used to display a list of current settings for
Ɣ
available items.
48
Clock setting
Used to make date and time settings and
corrections.
The clock is in 24 hours real time clock.
Ɣ
The accuracy of the clock is within
Ɣ
±30 seconds per month.
If there is a power failure for a period not
Ɣ
exceeding 48 hours, the clock will continue
working with the built-in backup power
supply
.
The clock needs settings again if the
power failure period exceeds 48 hours.
48
Language changeover
The displayed language can be selected from
the following language. (English/Deutsch/
Français/Español/Italiano/E
ȜȜȘȞȚț
Ȑ
/
Nederlands/Portugues/Pycc
Ƹɢɣ
/
Ɍ
ürkçe)
50
Note:
A
vailable setting items vary with the model connected.
Only the available setting items appear in the menu.
Menu Items of Sub Remote Controller
T
wo remote
controllers in control
Outdoor unit
Indoor unit
If two remote controllers are in control of a single indoor
unit, the following menu items are not set in the sub remote
controller
. Set them in the main remote controller
.
Set temp mode changeover
Ɣ
Schedule timer
Ɣ
Of
f reminder timer
Ɣ
Home leave
Ɣ
01_EN_3P243520-1.indd 25
2/6/2009 5:50:03 PM
24
English
The main menu has the following items.
Setting and display items
Description
Reference page
Set temp mode changeover
Select normal set temperature or limit control.
27
Airfl
ow direction setting
Used to make airfl
ow direction settings.
The airfl
ow direction blade are automatically
Ɣ
operated up and down (left and right).
The fi
xed airfl
ow directions are set to fi
ve
Ɣ
positions.
This function is not available to all models.
*
28
Quick Cooling/Heating On/Off
(SkyAir only)
Used to set the room to a conformable
temperature quickly (unless the system is
not in program dry or fan operation).
The maximum quick cooling/heating
Ɣ
operation period is 30 minutes.
31
V
entilation
V
entilation
operation
settings for total
heat exchanger
V
entilation rate
Used to set to “Low” “High”
32
V
entilation mode
Used to set
Automatic, Heat exchange, and
Bypass.
33
T
imer setting
Schedule timer
Operation start time and stop time can be
Ɣ
set according to the day of the week.
Either one of the following operation modes
can be selected.
•
Operation at set temperature: Normal
operation
•
Operation within set temperature range
(between max. and min. temperatures):
Limit operation
Up to 5 actions can be set for each day
.
Convenient holiday settings and temporary
Ɣ
closure settings are possible.
Clock settings are necessary
.
*
The system goes into schedule timer operation in
*
the previous mode set for the system.
35
Off reminder timer
Used to set each operation period of the system.
Possible to set in 10 minute units from 30 to
Ɣ
180 minutes.
42
Service Contact/Model
Information
Used to display the service contact and model
information.
44
Quick Reference of Main Menu Items
01_EN_3P243520-1.indd 24
2/6/2009 5:50:03 PM