Operation Manual
ED72-975
14
BRC1E61
6.2
Names and Functions
3P243520-1
English
9
Operation mode selector button
1.
Press this button to select the operation
Ɣ
mode of your preference.
(See page 14.)
A
vailable modes vary with the connecting
*
model.
Fan speed control button
2.
Press this button to select the fan speed of
Ɣ
your preference.
(See page 15.)
A
vailable fan speed vary with the
*
connecting model.
Menu/Enter button
3.
Used to indicate the main menu.
Ɣ
(See page 24 for the menu items.)
Used to enter the setting item selected.
Ɣ
Up button
4.
(Be sure to press the
part with the symbol
)
Used to raise the set temperature.
Ɣ
The next items on the upper side will be
Ɣ
highlighted.
(The highlighted items will be scrolled
continuously when the button is kept
pressed.)
Used to change the item selected.
Ɣ
Down button
5.
(Be sure to press
the part with the symbol
)
Used to lower the set temperature.
Ɣ
The next items on the lower side will be
Ɣ
highlighted.
(The highlighted items will be scrolled
continuously when the button is kept
pressed.)
Used to change the item selected.
Ɣ
Right button
6.
(Be sure to press
the part with the symbol
)
Used to highlight the next items on the
Ɣ
right-hand side.
Each screen is scrolled in the right-hand
Ɣ
direction.
Home leave settings are enabled with this
Ɣ
button kept pressed for at least four
seconds.
(See page 19.)
Left button
7.
(Be sure to press
the part with the symbol
)
Used to highlight the next items on the
Ɣ
left-hand side.
Each screen is scrolled in the left-hand
Ɣ
direction.
Home leave settings are enabled with this
Ɣ
button kept pressed for at least four
seconds.
(See page 19.)
On/Off button
8.
Press this button and system will start.
Ɣ
Press this button again and system will
Ɣ
stop.
Operation lamp (Green)
9.
This lamp lights up during operation.
Ɣ
This lamp blinks if a error occurs.
Ɣ
Cancel button
10.
Used to return to the previous screen.
Ɣ
LCD (with backlight)
1
1.
The backlight will be light for approximately
Ɣ
30 seconds by pressing any operation
button. Operate buttons excluding the On/
Of
f button while the backlight is lit.
If two remote controllers are used to control
Ɣ
a single indoor unit, the backlight of the
remote controller operated earlier than the
other one will be lit.
01_EN_3P243520-1.indd 9
2/6/2009 5:49:57 PM
8
English
Names and Functions
Functions other than basic operation items (i.e., On/Off, Operation
mode selector
, Fan speed control, and temperature settings) are set
from the menu screen.
NOTE
Do not install the remote controller in places exposed to direct sunlight.
Ɣ
Otherwise, the LCD may become discolored and nothing may be displayed.
Do not pull or twist the remote controller cord.
Ɣ
Otherwise, the remote controller may error
.
Do not press the buttons on the remote controller with objects with sharp ends.
Ɣ
Otherwise, the remote controller may receive damage or error
.
2.
Fan speed control
button
3.
Menu/Enter button
8.
On/Off button
10.
Cancel button
9.
Operation lamp
1
1.
LCD (with backlight)
4.
Up button
5.
Down button
6.
Right button
7.
Left button
1.
Operation mode
selector button
01_EN_3P243520-1.indd 8
2/6/2009 5:49:57 PM