Daikin Altherma M EDLQ011-016CW1, Руководство по установке для специалистов

Страница: 76 / 108

8 Configuration
Installer reference guide
76
EBLQ+EDLQ011~W1 + EK(2)CB
EKMB9W1
Daikin Altherma low temperature monobloc
4P522034-1 – 2018.01
8.5 Menu structure: Overview installer settings
[A]
[A.2]
[A.2.1]
[A.2.2]
[A.2.2.E]
[A.3]
[A.3.1]
[A.3.1.1]
[A.3.2]
[A.3.3]
[A.4]
[A.4.4]
[A.5]
[A.5.1]
[A.7]
[A.6]
[A.6.2]
Installer settings
Language
System layout
Space operation
Domestic hot water (DHW)
Heat sources
System operation
Commissioning
Overview settings
System layout
Standard
Options
Capacities
Confirm layout
Space operation
LWT settings
Room thermostat
Operation range
Domestic hot water
Type
Disinfection
Maximum setpoint
SP mode
Weather-dependent curve
Heat sources
Backup heater
System operation
Auto restart
Preferential kWh rate
Averaging time
Ext amb. sensor offset
Forced defrost
Commissioning
Test run
UFH screed dryout
Air purge
Actuator test run
Standard
Unit type
Compressor type
Indoor software type
Unit control method
Number of LWT zones
Pump operation mode
Power saving possible
User interface location
Options
DHW pump
External sensor
Control box
Option box
Leaving water
Main
Additional
Delta T source
Room thermostat
Room temp. range
Room temp. offset
Ext. room sensor offset
Operation range
Space heating OFF temp
Space cooling On temp
Disinfection
Disinfection
Operation day
Start time
Temperature target
Duration
Backup heater
Operation mode
Enable BUH step 2
Equilibrium temp.
Prefer. kWh rate PS
Allowed heaters
Forced pump OFF
Control box
Backup heater steps
BUH type
Preferential kWh rate
DHW operation
Main
LWT setpoint mode
Temperature range
Modulated LWT
Emitter type
[A.3.1.2] Additional
LWT setpoint mode
Temperature range
Room temp. step
[A.3.1.3] Delta T source
Heating
Cooling
Glycol present
Contact type main
Contact type add.
[A.2.2.F] Option box
Ext. backup heat src
Alarm output
External kWh meter
External kWh meter
External sensor
PCC by digital inputs
Emergency
LAN adapter
INFORMATION
Depending on the selected installer settings and unit type,
settings will be visible/invisible.