Daikin Altherma 3 H F, Руководство по установке для специалистов

Страница: 150 / 216

10 | Configuration
Installer reference guide
150
EPGA11~16DAV3(7) + EA23DA6V(7)+9W
Daikin Altherma 3 H F
4P556075-1A – 2021.09
# Code Description
[7.5.2] N/A User settings > Electricity price >
Medium
[7.5.3] N/A User settings > Electricity price >
Low
[7.6] N/A User settings > Gas price
Boiler efficiency
Depending on the used boiler, this should be chosen as follows:
# Code Description
[9.C.2] [7‑05] ▪ 0: Very high
▪ 1: High
▪ 2: Medium
▪ 3: Low
▪ 4:
Very low
Alarm output
Auto restart
Auto restart
When power returns after a power supply failure, the auto restart function
reapplies the user interface settings at the time of the power failure. Therefore, it
is recommended to always enable the function.
If the preferential kWh rate power supply is of the type that power supply is
interrupted, always enable the auto restart function. Continuous indoor unit
control can be guaranteed independent of the preferential kWh rate power supply
status, by connecting the indoor unit to a separate normal kWh rate power supply.
# Code Description
[9.E] [3-00] Auto restart :
▪ 0: Manual
▪ 1: Automatic
Power saving function
Power saving function
Defines whether the outdoor unit power supply can be interrupted (internally by
indoor unit control) during stand-still conditions (no space heating/cooling nor
domestic hot water demand). The final decision to allow power interruption of the
outdoor unit during standstill depends on the ambient temperature, compressor
conditions and minimum internal timers.
To enable the power saving function setting, [E‑08] needs to be enabled on the
user interface.
# Code Description
[9.F] [E‑08] Power saving function for outdoor unit:
▪ 0: No
▪ 1: Yes