manualshive.com logo in svg

Daikin Altherma 3 ECH2O, Инструкция по установке и обслуживанию

Поделиться
Скачать
Daikin Altherma 3 ECH2O Скачать руководство пользователя страница 56

9 

Taking out of operation

Installation and maintenance instructions

56

Daikin Altherma EHS(X/H)(B)-D

Heat pump (indoor unit) with integrated heat accumulator

008.1444099_01 – 11/2018 – EN

3

dismantled in accordance with the installation instructions in re-
verse order,

4

disposed of in a professional manner.

Recommendations for disposal

We designed the indoor unit in an environmentally friendly manner.
During the disposal process, the only waste created is that which
can be used for material or thermal recycling. The materials used
that are suitable for recycling can be sorted into individual types.

 Thanks to the environmentally friendly design of the in-

door unit, we have established requirements to ensure environ-
mentally friendly disposal. Proper disposal in compliance with the
respective national regulations of the country of use is the respons-
ibility of the user/owner.

 The designation of the product means that electrical and

electronic products may not be disposed of together with unsorted
domestic waste.

Proper disposal in compliance with the respective national regula-
tions of the country of use is the responsibility of the user/owner.

▪ Disassembly of the system, handling of coolant, oil and other

parts may only be carried out by a qualified fitter.

▪ Disposal may only be carried out by an organization that special-

ises in reuse, recycling and recovery.

Further information is available from the installation company or the
responsible local authorities.

Содержание Altherma 3 ECH2O





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды