Daikin Advanced plus, Инструкция по установке и эксплуатации, Страница: 35 / 192

Installation and operation manual
13
FWEC3
Advanced plus electronic controller
FC66002765
Mon
:
-
H30
= daily pro fi le (1 or 2) for MONDAY
Tue
:
-
H31
= daily pro fi le (1 or 2) for TUESDAY
Wed
:
-
H32
= daily pro fi le (1 or 2) for WEDNESDAY
Thu
:
-
H33
= daily pro fi le (1 or 2) for THURSDAY
Fri
:
-
H34
= daily pro fi le (1 or 2) for FRIDAY
Sat
:
-
H35
= daily pro fi le (1 or 2) for SATURDAY
Sun
:
-
H36
= daily pro fi le (1 or 2) for SUNDAY
-
H37
= 24H or 12H display
DEFAULT VALUES OF PARAMETERS
-
H00
= 0 (scheduling disabled)
-
H01
= 06:00
-
H02
= 22:00
-
H03
= 08:00
-
H04
= 20:00
-
H12
= OFF
-
H13
= ON
-
H14
= OFF
-
H15
= OFF
-
H16
= ON
-
H17
= OFF
-
H18
-
H23
= 25°C
-
H24
-
H29
= 22°C
-
H30
-
H34
= 1
-
H35
-
H36
= 2
-
H37
= 24H
If the 12H display mode has been set (parameter
H37
), for
con fi guration parameters
H01
to
H11
(except
H03
) the display will
not show the sequential number of the parameter but rather
the hourly situation expressed in AM/PM.
DISPLAY
If the time programming function is enabled, when the ther-
mostat is on the clock symbol will always appear and it will be
possible to check whether the time settings are correct (only
for a few instants) by simultaneously pressing the SEL+MODE
buttons. When the thermostat is off, the clock symbol and
current hour will appear constantly on the display only if the
ON/OFF time programming mode is enabled.
PARAMETER LIST
Time schedules are programmed by setting the individual pa-
rameters encountered when scrolling with the arrow keys.
Warning: there are a total of 37 parameters, but not of all them
are accessible. Whether certain parameters will be displayed
or not depends on the value assigned to the
fi rst parameter
(
H00
), i.e. the operating mode selected. More speci fi cally:
■
if
H00
=(ON/OFF mode), parameters H18 to H29 will not be
displayed
■
if
H00
=2 (operation based on temperature SETPOINT),
parameters H12 to H17 will not be displayed
■
if
H00
=0 the time programming function is disabled and
therefore no parameter will be displayed except for H00
Below is a description of all 37 parameters, in sequence.
■
H00
ENABLING AND OPERATING MODES
-
H00
=0: scheduling disabled
-
H00
=1: ON/OFF time schedules
-
H00
=2: time schedules based on temperature SETPOINT
CLO:
-
H01
= HOUR of controller clock
-
H02
= MINUTES of controller clock
DAY:
-
H03
= DAY OF THE WEEK
Hr1
:
-
H04
= OUR (0-23) of SCHEDULE 1
-
H05
= MINUTES (0-59) of SCHEDULE 1
Hr2
:
-
H06
= HOUR (0-23) of SCHEDULE 2
-
H07
= MINUTES (0-59) of SCHEDULE 2
Hr3:
-
H08
= OUR (0-23) of SCHEDULE 3
-
H09
= MINUTES (0-59) of SCHEDULE 3
Hr4:
-
H10
= HOUR (0-23) of SCHEDULE 4
-
H11
= MINUTES (0-59) of SCHEDULE 4
-
H12
= STATUS (ON or OFF) of TIME SLOT 1
-
H13
= STATUS (ON or OFF) of TIME SLOT 2
-
H14
= STATUS (ON or OFF) of TIME SLOT 3
-
H15
= STATUS (ON or OFF) of TIME SLOT 4
-
H16
= STATUS (ON or OFF) of TIME SLOT 5
-
H17
= STATUS (ON or OFF) of TIME SLOT 6
SP1
:
-
H18
= SUMMER temperature SETPOINT of TIME SLOT 1
SP2
:
-
H19
= SUMMER temperature SETPOINT of TIME SLOT 2
SP3
:
-
H20
= SUMMER temperature SETPOINT of TIME SLOT 3
SP4
:
-
H21
= SUMMER temperature SETPOINT of TIME SLOT 4
SP5
:
-
H22
= SUMMER temperature SETPOINT of TIME SLOT 5
SP6
:
-
H23
= SUMMER temperature SETPOINT of TIME SLOT 6
SP1
:
-
H24
= WINTER temperature SETPOINT of TIME SLOT 1
SP2
:
-
H25
= WINTER temperature SETPOINT of TIME SLOT 2
SP3
:
-
H26
= WINTER temperature SETPOINT of TIME SLOT 3
SP4
:
-
H27
= WINTER temperature SETPOINT of TIME SLOT 4
SP5
:
-
H28
= WINTER temperature SETPOINT of TIME SLOT 5
SP6
:
-
H29
= WINTER temperature SETPOINT of TIME SLOT 6