Si121858E
Electrical Box / Partition Plate / Sound Blankets
Removal Procedure
17
3. Remove the sound
blankets.
1
Remove the sound
blanket (top).
2
Remove the sound
blanket (outer).
To remove the overload
protector, push the top of the
retainer and release the 2
hooks with a flat screwdriver.
The radiation sheet is
attached on the back of the
retainer of overload
protector. When replacing
the compressor, be sure to
replace the radiation sheet.
3
Put in the harness of
overload protector
through the window of
the sound blanket
(inner).
If the overload protector
needs to be replaced,
release the 2 hooks and
remove the overload
protector.
4
Remove the sound
blanket (inner).
Step
Procedure
Points
Sound blanket (top)
(R25802)
Sound blanket (outer)
(R25803)
Retainer
Overload
protector
(R25805)
Radiation
sheet
(R25806)
Hook
Overload
protector
(R25804)
Sound
blanket
(inner)
(R25807)
