Daihen OTC Welbee WB-M350, Руководство пользователя

Страница: 4 / 144

ii
Important Information
Use of the Product
This product is a power supply unit designed and manufactured for use in arc welding.
Do not use the product for any other purposes.
Safe Use of the Product
For safe use of the product (hereafter referred to as welding power source), ensure to follow the
instructions below:
• This manual is intended for workers who are familiar with the listed terminologies. If this product is going
to be operated or serviced by workers who are not familiar with the terminology, the responsibility falls
on the customer to provide thorough training on operation and safety.
• This equipment and this manual are for use only by persons trained and experienced in the safety
operation of welding equipment. Untrained persons must complete the "Special workshop for arc
welding".
• For protection from possible injury or damage in the equipment, be sure to read and follow the safety
information in this manual. Do not use it for purposes not indicated in the manual.
• Make sure that installation/operation/maintenance of the welding power source and welding machine is
performed by a qualified personnel with sufficient knowledge and skills.
• If this manual is lost or damaged, immediately contact your dealer.
Copyright
This manual is copyrighted and all rights are reserved by OTC. Any part of the manual shall not be
copied, photocopied, or reproduced without the prior consent of OTC.
When Exporting the Product
The following conditions are to be observed and met when exporting the product outside of the country.
• The product is designed and manufactured according to the Japanese laws/specification and industrial
standards. The product may not conform to laws/specification and standards in other countries.
• When shipping or reselling the product outside of the country, make sure to contact our distributor or
customer service in advance.
Disposal of the Product
For disposal of welding equipment including the welding power source and welding material, confirm
the regulation of the country/region in which the equipment is located and follow the rules. When
disposing, arrange consignment contract for waste disposal with an authorized waste collectors and
manage the disposal processes.