Daihen OTC Welbee WB-M350, Руководство пользователя

Страница: 110 / 144

W
ELDING
R
ESULT
C
ONTROL
F
UNCTION
A
DMINISTRATOR
F
UNCTIONS
C
HAPTER
7
7-4
7.2 Welding Result Control Function
This section explains about the welding result control function. The function enables the management of
the items below.
Details of control contents ( 7.2.2
-
Details of welding control items)
7.2.1 Setting welding result control function
This section explains how to set the welding result control function.
1.
Press and hold the WELD MONITOR key for one second or more.
Welding control
parameter
Monitor
No.
Initial
value
Setting range Explanation
Number of welding
point
P10 0 - Cumulative number of welding points (number of times)
P11 0 0 to 999 Target value of welding points (number of times)
P12 0 0 to 5
Operation at the time when the target value of welding points
is achieved
Wire consumption
P20 0.00 - Cumulative wire consumption used in welding [lbs (kg)]
P21 0
0 to 999
(0 to 453)
Target wire consumption [lbs (kg)]
P22 0 0 to 5
Operation at the time when the target wire consumption is
achieved
Total welding time
P30 0 - Cumulative total welding time (minute)
P31 0 0 to 999 Target total welding time (minute)
P32 0 0 to 5
Operation at the time when the target total welding time is
achieved
Welding monitor
P40 0 - Max. fluctuation value of average range monitor (A or V)
P41 100 0 to 100 Current tolerance (+) (%)
P42 100 0 to 100 Current tolerance (-) (%)
P43 100 0 to 100 Voltage tolerance (+) (%)
P44 100 0 to 100 Voltage tolerance (-) (%)
P45 0 0 to 100 WARNING judgment time (second)
P46 0 0 to 2 Operation at the time of WARNING detection
⇒
The LED of WELD MONITOR key lights up.
⇒
The monitor No. is displayed on the left digital
meter.
⇒
The data value specified for the monitor No. is
displayed on the right digital meter.
A V
r
㧑
WARNING
IPM.
sec.
JOB No.
WELD
MONITOR
Hz