Daihen OTC Welbee Inverter W400, Руководство пользователя

Страница: 69 / 158

6-3
Chapter 6 W
elding Condition
L
IST OF
W
ELDING
C
ONDITIONS
W
ELDING
C
ONDITION
C
HAPTER
6
F18 Anti-stick voltage adjustment -9.9 to 9.9 0.0 (V)
Allows fine tuning meltage of the wire at the end
of welding based on the anti-stick process
voltage.
○
F19 Alarm setting switching OFF/ON OFF
Sets the output status when an error of the alarm
level is detected:
OFF: Ineffective
ON: Stops the output
-
F20
Low input voltage
detection level
260 to 400 320 (V)
Adjusts the low primary input voltage detection
level.
-
F21
Maximum cooling fan
operation
OFF/ON OFF
Sets the operation mode of cooling fan:
OFF: Economical operation
ON: Rotates the fan at maximum speed at all time
-
F22 Operation sound switching OFF/ON ON
Sets the operation sound when any key is pressed
on the operation panel:
OFF: Turns off the sound
ON: Turns on the sound
-
F23
Sleep mode
switching time
0 to 10 0
Sets the time until the welding power source
enters into sleep mode:
0: OFF
1 to 10: 1 min to 10 min
-
F24 Wire feeding speed setting OFF/ON OFF
Sets the criteria for welding condition:
OFF: based on current
ON: based on wire feeding speed
-
F25 External output 1 setting
0/4 0
Sets the functions of output terminal of the
programmable I/O.
-
F26 External output 2 setting
F27 External output 3 setting
F28 External output 4 setting
F29 External input 1 setting
0 to 9 0
Sets the functions of input terminal of the
programmable I/O.
-
F30 External input 2 setting
F31 External input 3 setting
F32 External input 4 setting
F33
No function OFF (fixed) OFF No functions are provided. -
F34
F35
F36
F37
F38
Arc voltage direct detection
switching
OFF/ON OFF
Sets the voltage direct detecting terminal on the
base metal side of the welding power source and
voltage detection terminal of the wire feeder.
OFF: ineffective
ON: effective
-
F39
Current display adjustment
(GAIN)
-20 to 20 0 (%)
Adjusts the current values displayed on the digital
meter.
-
F40
Current display adjustment
(OFFSET)
-20 to 20 0 (A)
F41
Voltage display adjustment
(GAIN)
-20 to 20 0 (%)
Adjusts the voltage values displayed on the digital
meter.
-
F42
Voltage display adjustment
(OFFSET)
-2.0 to 2.0 0.0 (V)
F43 CAN ID 1 to 16 1
Sets CAN ID numbers to be used in the PC
monitoring system, etc.
-
F44
Reading welding conditions
with remote control
OFF/ON OFF
Sets whether to read "1" to "10" of the welding
conditions stored on the memory via the analog
remote control:
OFF: Not to read
ON: Reads
-
No. Function Name Setting range Initial value Explanation Memory