Dahua NAVIGATOR X1100, Руководство пользователя

Страница: 27 / 102

15
No. Name Function
18 SD slot
Insert micro SD card: The micro SD card with the chip is
facing down. Insert the card to the slot horizontally.
Remove micro SD card: Press micro SD card inwards, so
micro SD card pops up a little bit, and can be pulled out.
19 Power port Input DC 12V power.
20 PTZ mode lever
2-level lever. It is to select PTZ mode.
Upper level: Course following mode. The PTZ camera angle
changes with aircraft flight direction.
Lower level: Course locking mode. No matter what the
aircraft flight angles are, the PTZ camera always faces the
same degree to shoot.
21 Record button
Press this button shortly to start recording, and press it again to
stop recording.
22
PTZ pitch scroll
wheel
Control vertical shooting angle of camera lens.
Table 2-4
Figure 2-11
No. Name Function
23 Zoom in button
Press it for a short time, to zoom in the camera.
Press it for a long time, to zoom in until the camera reaches
the maximum magnification.
24 Power switch Turn on or turn off the remote control.