Dahua Mobile DVR Series, Руководство пользователя

Страница: 64 / 172

53
System can trigger message prompt, alarm output or buzzer when abnormal event occurs.
Step 1 From main menu->Setting->Event->Abnormality, the interface is shown as in Figure
4-48.
Figure 4-48
Step 2 Set parameters.

Event type: There are several options for you such as disk error, no disk, no space, high
temperature, low battery, over speed, low speed, turnover, collision and etc. (multiple
choices).

Enable: Check the box here to enable this function.

Alarm output: Please select alarm activation output port (multiple choices).

Less than: You can set HDD threshold here so that system can alert you once the HDD
space is lower than the threshold here.

Latch: Here you can set corresponding delaying time. The value ranges from 1s -300s.
System automatically delays specified seconds in turning off alarm and activated output after
external alarm cancelled.

Show message: system can pop up the message in the local screen to alert you when an
alarm occurs.

Alarm upload: System can upload the alarm signal to the network (including alarm center)
if you enabled current function.

Send email: System can send out email to alert you when an alarm occurs.

Restart system: If you highlight the button here, system will restart automatically if there is
no HDD.

Buzzer: Highlight the icon to enable this function. The buzzer beeps when an alarm occurs.
Step 3 Click Save button.
4.10.4 Alarm Output
It is to set alarm output channel mode: manual/auto/close.