Dahua Mobile DVR Series, Руководство пользователя

Страница: 60 / 172

49
Figure 4-43
Figure 4-44
Step 2 Set parameters.

Event type: From the dropdown list you can select motion detection type.

Channel: Select a channel from the dropdown list to set motion detect function.

Enable: Check the box here to enable motion detect function.

Region: Click select button, the interface is shown as in Figure 4-44. Here you can set motion
detection zone. There are 396(PAL)/330(NTSC) small zones. The green zone is current
cursor position. Grey zone is the motion detection zone. Black zone is the disarmed zone.
You can click Fn button to switch between the arm mode and disarm mode. In arm mode,
you can click the direction buttons to move the green rectangle to set the motion detection
zone. After you completed the setup, please click ENTER button to exit current setup. Do
remember click save button to save current setup. If you click ESC button to exit the region
setup interface system will not save your zone setup.

Delay motion: Check the box to delay motion detect function. This function becomes valid
when ACC OFF.