139
Table 4-48
Date & Time parameters
Parameter
Description
Date Format
Date format.
Time Format
Configure the Time format, you can select from 24-Hour or 12-Hour.
Time zone
Configure the Time zone that the Camera is at.
Current Time
Configure system time.
Click "Sync PC", and the system time changes to the time on PC.
DST
Enable DST as needed.
Select the check box to enable daylight saving time. Select "DST", and then
configure start time and end time of DST with dates or days of the week.
NTP
When you need the Camera to transmit its time to NTP server, you can select
the
NTP
check box to enable it.
Server
IP address or domain name of the NTP server.
Port
Port number of the FTP server.
Interval
Time gap of Camera’s transmission of its current time to NTP server.
Click
Save
.
Step 3
4.8.1.3
Configuring GPS
Fill in the camera’s GPS information in the web to remind you where your camera locates.
Also, automatically sent to the management platform, the GPS information can be viewed on the
platform to help the platform operator track your camera.
This function is supported on select models and the actual interface shall prevail.
Select
Setting > System > General > GPS
.
Step 1
The
GPS
interface is displayed. See Figure 4-89.
GPS
Figure 4-89
Fill in your camera’s
LON
,
LAT
and
Altitude
information.
Step 2
Click
Save
.
Step 3
4.8.2
User Management
Managing users and groups are only available for administrator users.
The max length of the user or group name is 15 characters which can only be consisted of
letters, numbers and underlines.
The password must have 8 to 32 digits and at the same time have at least two forms (There are
four password forms altogether: capital letter, lowercase letter, number and special characters. “'”,
