Figure 5-15 Add the password
5.2.5.4.2 Adding Cards
Add IC cards or ID cards to users for them to gain access by swiping their cards
Procedure
Step 1
(Optional) Before you assign cards to users, set the card type and the type of card
number.
a. On the Person Management page, select More > Card Type.
b. If you plan on issuing cards through using enrollment reader, select a card type, and
then click OK.
Make sure that the card type is the same as the card type that will be issued when you
plan on issuing cards through using enrollment reader. For details, see Click Add. Click
Modify, and then select Enrollment Reader. Make sure that the card enrollment reader
is connected to your computer. Follow the on-screen instructions to download and
install the plug-in. Click Read Card, and then swipe the cards on the enrollment reader.
A 60-second countdown is displayed to remind you to swipe the card, and the system
will read the card number automatically. If the 60-second countdown expires, click
Read Card again to start a new countdown. Click Add. .
c. Select More > Card No. System.
d. Select decimal format or hexadecimal format for the card number.
Step 2
On the Authentication tab, click Card to add cards.
4 methods are available to add cards.
●
Enter the card number manually.
a. Click Add.
Quick Start Guide
40
