Dahua Technology IPC-HDW5842T-ZE, Руководство по эксплуатации

Страница: 70 / 473

Operation Manual
56
camera from taking a clear picture, otherwise, the splicing might fail.
Step 1
Select Setting > Camera > Conditions > Splicing .
Figure 4-49 Splicing
Step 2 Select the lenses that need to be spliced.
When splicing the image through selecting lenses, you need to select the continuous
splicing screens. The screen with the icon
(deeper color) is the first screen of the
splicing. You can select any screen as the first one, and then select the following screens
continuously. The system supports the splicing of 2 lenses to 8 lenses.
●
This function is available on select models. And it is all sensors splicing by default.
●
For Multi-Sensor Pan PTZ Camera, the 4-sensor device supports 2 to 4 lenses
splicing; the 6-sensor device supports 2 to 6 lenses splicing; the 8-sensor device
supports 2-8 lenses splicing.
Step 3 Click Start .
The system starts to splice the image.
●
Some cameras restart automatically after splicing is complete, You can view the results
of the splicing in the Live window.
●
Some cameras display splicing live window after splicing is complete. Click OK , and
then the default window appears. Click
OK
and the splicing will take effect.
4.5.2 Setting Video Parameters
This section introduces video parameters, such as video, snapshot, overlay, ROI (region of interest),
and path.
Click Default , and the device is restored to default configuration. Click Refresh to view the latest
configuration.
4.5.2.1 Video
Configure video stream parameters, such as stream type, encode mode, resolution, frame rate, bit
rate type, bit rate, I frame interval, SVC, and watermark.
Step 1
Select
Setting
>
Camera
>
Video
>
Video
.