Web Configuration 61
Parameter Description
Insert
Front
Select an OSD option, and then click
Insert Front
before selecting another
OSD option, the new OSD option will be shown before the original OSD option.
Insert
Back
Select an OSD option, and then click
Insert Back
before selecting another
OSD option, the new OSD option will be shown after the original OSD option.
Modify
Click
Modify
, and the status of OSD information (New Line excluded) will
change to
. Click
to modify the prefix, postfix, content and separater
of corresponding OSD option.
Delete
Click
Delete
, and the status of all selected OSD information will change to
.
Click
to delete the corresponding OSD option.
Remove
All
Delete all the OSD information.
New Line
Select one OSD information, and then click
New Line
. The option next to the
selected OSD information will be shown in a new line in the snapshot (captured
by clicking
ANPR Receive
on
Live
interface).
Click
Yes
to save the configuration. You can right-click on the halo zone to delete the
Step 7
zone.
Click
OK
to save the configuration. Click
Refresh
to refersh the interface. Click
Default
Step 8
to restore to default settings.
6.5.1.5.3 Merge OSD
It is to configure the OSD information and location of composite picture.
Select
Setting > ITC > OSD Config > Merge OSD
. The
Merge OSD
interface is displayed.
See Figure 6-64.
Merge OSD
Figure 6-64
The setting of Merge OSD is similar to Snap OSD. See "6.5.1.5.2 Snap OSD".