Installation 10
3.3.1 Installing the Cable
Insert the screwdriver into the square slot corresponding to the connecting cable. Press
Step 1
the screwdriver vertically to loosen and expose the metal sheet of the circular slot.
Insert the cable into the circular slot.
Step 2
Remove the screwdriver, and the cable installation is finished.
Step 3
3.3.2 Removing the Cable
Insert the screwdriver into the square slot corresponding to the connecting cable. Press
Step 1
the screwdriver vertically to loosen and expose the metal sheet of the circular slot.
Pull the cable out of the circular slot.
Step 2
Remove the screwdriver, and the cable is disassembled.
Step 3
Corrugated Pipe
3.4
The corrugated pipe helps protect the cable.
Pull the cable into the corrugated pipe, and then pass the cable through the hole at the bottom
of the device. After the cable is properly placed, insert the corrugated pipe into the hole until it is
securely clamped.
