Structure 4
2
Structure
Rear Panel
2.1
Rear panel
Figure 2-1
Table 2-1 Rear panel interfaces
Interface
Function
DC 12 IN
Power input
interface
12V DC input.
SI+, SI-
Synchronous
input interface of
external
frequency source
The camera synchronizes with external signal source
(automatically
works
after
selecting
external
synchronous. Voltage range: 12 Vp-p
–36 Vp-p, or AC
12V
–AC 24V).
RESET
Reset button
Restore to factory default settings. When system runs
normally (the power indicator light is blue), press and
hold the RESET button for at least 5 seconds, and the
system restores to factory default settings.
STATUS
Indicator light
Displays the activity status of the camera. The status of
indicator light is as follows:
The blue light keeps on when the system runs
normally.
The red light flashes when the system is updating.
The red light keeps on in safety mode.
DC 12 OUT
Power output
interface
12V DC output.
GPS
Used for connecting GPS antenna.
