30
Figure 5- 27
Step 2. Refer to the following chart.
Parameter
Note
Enable
After checked, enable FTP server.
Encoding
Two encoding format, as UTF-8 and GB2812.
Test
Click “Test”, if FTP server connects successfully or not. System will
generate test file according to selected encoding format.
Server Address
FTP server IP address
Port
FTP server port no., default port is 21.
User
FTP server username
Password
FTP server password
Remote Storage
Path
FTP server file path
Enable Offline
Transfer
After checked, when device and FTP server disconnect, when they
connect again, picture transfer will continue.
Picture Type
Check original picture, combination picture, and related record to
upload to the server according to violation type.
