26
Figure 5- 19
Step 2. Select one channel, check Enable.
Step 3. According to actual condition, select protocol type. Available protocols are Onvif, Provate,
RTSP.
Note:
You can customize RTSP main stream URL, default URL format is:
rtsp://[username]:[password]@[ip]:[port]/cam/realmonitor?channel=1&subtype=0
Step 4. Input camera IP address, port, username, password and device location. You can click
System Config to view camera system info.
Step 5. Click Save.
View Ethernet status
The device self-carried RH45 10M/100M Ethernet port, may be used as switch to connect
multiple front-end cameras.
If front-end camera has been connected to device’s Ethernet port via cable already, you can click
Refresh to view each Ethernet port’s camera name, MAC, IP address and Ethernet port no.
5.5.4
Event
Before config, please refer to Ch 2.2.2 to complete alarm port connection.
Figure 5- 20
5.5.4.1 Local Alarm
Local alarm is the alarm signal detected by device at alarm input port.
Step 1. Select Event>Local Alarm. See Figure 5- 23.
