25
Step 3. Click Add IP, in the pop-up box, input IP address or IP segment, Click Save.
Step 4. Check Enable, Click Save.
5.5.3.4 Auto Register
After auto register is enabled, device automatically registers to management server, and you can
preview and monitor device on server.
Step 1. Select Network>Auto Register, see Figure 5- 20.
Figure 5- 18
Step 2. Check Enable, to enable auto register.
Step 3. Input device management server IP address, port no. and device ID.
Step 4. Click Save.
5.5.3.5 Remote Device
Connect network camera
If you want to connect to network camera, get video or picture, you need to set up corresponding
relationships between camera and channels.
Step 1. Select Network>Remote Device, see Figure 5- 21.
