DAHAO BECS-185, Руководство пользователя

Страница: 25 / 236

Chapter 2 Embroidery Guide
Owner’s Manual of BECS- 185 Computerized Control System 13
No. Display Name Description Reference Page
(Press or Color-changing Key
on panel). After the machine turn to
the needed needle position, user can
press the start key for the
embroidery (Manual Start).
Auto
Color-changing
Manual Start
If the machine is set at Auto
Color-changing, user should set the
color-changing order in advance
(Click and then for
setting).
When user presses the start key for
embroidery, no matter where the
current needle rod locates, the
machine will change the needle
according to the set color-changing
order and perform the embroidery.
When encountering the
color-changing code, the machine
will stop automatically and shift to
the pointed needle position
according to the auto
color-changing order. If the machine
is set at auto start, the machine will
begin the embroidery automatically;
if it is set at the manual start, the
user needs to press the start key for
embroidery.
Chapter2.5
Auto
color-changing
Auto Start
Chapter2.5
4 Design
Management
Click it to enter the memory design
management interface, which
includes “select design”, “disk
input”, displaying designs, creating
new designs and monogram
operation.
Chapter 6
5 Parameter Setting Click it to enter the parameter setup
interface which includes
color-changing order and the normal
parameters like scaling down/up and
repetition, as well as the general
Chapter 4