DAHAO BECS-185, Руководство пользователя

Страница: 79 / 236

Chapter 6 Memory Design Management
Owner’s Manual of BECS- 185 Computerized Control System 67
In this interface click the buttons to enter the corresponding operation interfaces. Please
read the following paragraphs for detailed explanation. Click or to turn the
page, and click to return to the memory design management interface.
6.2 Select a Design to Embroider
1
、
Select a new design (Make sure that the system is in preparation status .
2
、
Click in the main interface to enter the memory interface management
interface.
3
、
Select the design in the memory design area of the memory design management
interface.
4
、
Click to set the selected design as the embroidery design. If the operation
is completed, the system will close the memory design interface and return to the main
interface.