DAHAO BECS-185, Руководство пользователя

Страница: 75 / 236

Chapter 5 Setting of Embroidery Parameters
Owner’s Manual of BECS- 185 Computerized Control System 63
Select the parameter in the list. And in the right parameter-changing window there will
appear keys to change the value. User can use these keys to change the current parameter.
3
、
Change the current parameter in the parameter-changing window
Change the current parameter in the parameter-changing window.
4
、
Click to finish the setting of the parameter.
5.2 Instruction of Some Functions within General Parameters
There are brief introductions of the parameters in the appendix 1. At here, we will
introduce some functions used in embroidery.
5.2.1.
Cyclic Embroidery Function
This function is to increase the embroidery productivity.
When the parameter “To Do Cyclic Emb.” is set as “Yes”, the cyclic embroidery
function is activated and the icon will appear in the main interface. If this function is
activated, the machine will automatically embroider the designated design again without any
operation when completing it.
Usually, cyclic embroidery should accompany repetition embroidery and specially made
design, and the parameter
“
Auto Origin
”
should be also set as
“
Yes
”
. Thus when the
machine is embroidering the back fabric, the front one can be replaced. After embroidering
the designated design, the frame will automatically return to the start point and the machine
will automatically embroider the front fabric again and at this time it’s possible for user to
replace the back one.