DAF 95XF, Руководство по обслуживанию

Страница: 131 / 188

95 XF
series Removal and installation
EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
4-11
VF engine
Removing the coolant filter
1. Place a tray beneath the coolant filter to
collect any escaping coolant.
2. Remove the filler cap from the expansion
tank.
3. Switch the shut-off valve to the “OFF”
position. This is the horizontal position.
4. Remove the coolant filter by turning it
counter-clockwise.
Installing the coolant filter
1. Clean the sealing face of the coolant filter.
2. Apply a small amount of coolant to the seal
of the coolant filter element.
3. Fit the coolant filter so that the seal makes
contact. Then tighten the filter by hand
½
-
to
¾
-of a turn.
4. Switch the shut-off valve to the “ON”
position. This is the vertical position.
5. Fit the filler cap on the expansion tank.
6. Run the engine and check that the coolant
filter has sealed correctly.
7. Check the coolant level.
OFF
ON
M2133
”ON”
”OFF”
OFF
ON
O
F
F
O
N
O
F
F
O
N
O
F
F
O
N
M2134
5
 200424