DAF 95XF Скачать руководство пользователя страница 129

Страница: 129 / 188

series

Removal and installation

EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES

4-9

4.7 REMOVAL AND INSTALLATION, FUEL COARSE FILTER

A quantity of fuel will escape when
the fuel coarse filter is removed.
Collect the fuel to avoid the risk of
fire.

Removing the fuel coarse filter

Place a tray beneath the filter.

Remove the cover by turning it
counter-clockwise.

Remove the coarse filter (1).

Check the seal (2) for damage. Replace the
seal if it is damaged.

Installing the fuel coarse filter

Apply a thin layer of non-acidic grease to
the seal.

Install the cover together with the coarse
filter by screwing the cover on finger-tight.

Bleed the fuel system, if necessary. See
“Inspection and adjustment”.

Start the engine and check for leaks.
Retighten the filter by hand, if necessary.

i400384



200424

Содержание 95XF





























































































































































































Результаты поиска

Содержание 95XF

Отзывы:

Похожие инструкции для 95XF

Бренды по названию

Популярные бренды

DAF 95XF, Руководство по обслуживанию

Результаты поиска

Содержание 95XF

Отзывы:

Похожие инструкции для 95XF

Бренды по названию

Популярные бренды