DAF 95XF Скачать руководство пользователя страница 122

Страница: 122 / 188

EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES

Removal and installation

series

4-2

4.2 REMOVAL AND INSTALLATION, OIL FILTER

To prevent skin injury, avoid
unnecessary contact with the
drained oil.

XF/XE engine

Removing the oil filter

Place a tray beneath the filter.

Remove the filter by turning it
counter-clockwise using a strap wrench.

Note:

The oil filter is a disposable filter, and may
not be cleaned and reused.

M200370

Installing the oil filter

Fill the new oil filter before fitting using the
specified oil grade.

Lightly lubricate the sealing ring with engine
oil.

Fit the filter so that the seal makes contact.
Then tighten the filter to the specified
tightening torque, see “Technical data”.

Start the engine, and run it at idling speed
for a short time. Check whether the oil filter
is correctly sealed.

Then check the oil level.

M200371



200424

Содержание 95XF





























































































































































































Результаты поиска

Содержание 95XF

Отзывы:

Похожие инструкции для 95XF

Бренды по названию

Популярные бренды

DAF 95XF, Руководство по обслуживанию

Результаты поиска

Содержание 95XF

Отзывы:

Похожие инструкции для 95XF

Бренды по названию

Популярные бренды