5.2.4. Replacement of oil filter cartridge
At the same times of oil exchanges, replace
the oil filter cartridge.
•
Drain engine oil by loosening the drain
plug on the filter head.
Caution :
Don’t forget tightening the
drain plug after having
drained engine oil.
•
Loosen the oil filter by turning it counter-
clockwise with a filter wrench.
•
With a rag wipe clean the fitting face of the
filter body and the oil filter body so that
new oil filter cartridge can be seated
properly.
•
Lightly oil the O-ring and turn the oil filter
until sealing face is fitted against the O-ring. Turn 1-1/4 turns further with the filter wrench.
Note :
It is strongly advisable to use DAEWOO genuine oil filter cartridge for replacement.
5.3. Cooling system
The coolant must be changed at intervals of 1,200 hours operation or six months whichever
comes first. If the coolant is being fouled greatly, it will lead an engine overheat or coolant blow
off from the expansion tank.
5.3.1. Coolant draining
a) Remove the pressure cap.
b) Open the drain valve at the radiator lower
part to drain the coolant as the right figure.
EA7O5004
Drain plug
Cartridge
Drain Valve
EA5O4002
- 32 -
