Daewoo KOR-612L0S, Руководство по обслуживанию

Страница: 7 / 55

6
Touch Power pad,
Once the touch
HIGH
M-HIGH
MED
M-LOW
LOW
Power Level (Display)
P-HI
P-80
P-60
P-40
P-20
Approximate Percentage
of Power
100%
80%
60%
40%
20%
This section includes useful information about oven operation.
1. Plug power supply cord into a 230V 50Hz power outlet.
2. After placing the food in a suitable container, open the oven door and put it on the glass tray.
The glass tray must always be in place during cooking.
3. Shut the door. Make sure that it is firmly closed.
Wattage output chart
The power-level is set by pressing the POWER pad. The chart shows the display, the power level and the per-
centage of power.
OPERATION PROCEDURE
When the oven door is opened, the light turns
off.
The oven door can be opened at any time dur-
ing operation by touching the door release but-
ton on the control panel. The oven will automati-
cally shut off. To restart the oven. close the door
and then touch START.
Each time a pad is touched, a BEEP will sound
to acknowledge the touch.
The oven automatically cook on full power
unless set to a lower opwer level.
The display will show “ : 0” when the oven is
plugged in.
Time clock returns tol the present time when the
cooking time ends.
When the STOP/CLEAR pad is touched during the
oven operation, the oven stops cooking and all
information retained. To erase all information
retained. To erase all information (except the pre-
sent time), touch the STOP/CLEAR pad once
more. lf the oven door is opened during the oven
operation, all information is retained.
If the START pad is touched and the oven does
not operate, check the area between the door and
door is closed securely. The oven will not start
cooking until the door is completely closed or the
program has been reset.
1
2
3
4
5
6
7
8
Make sure the oven is properly installed and
plugged into the electrical outlet.