15
Broil Element Assembly Removal
ImPORTANT: the broil element wires must be properly labeled so that they can be connected to the same terminal when
the element is replaced. If the wires are not properly connected, the oven will not function properly.
ImPORTANT: When removing it from the oven, do not hold the broil element assembly by the wires. Damage to the broil
element terminals may result.
• Remove the oven door(s) as described on page 8.
• Remove the oven racks from the oven chamber.
• Holding the broil element assembly in place with one hand, remove the screws that hold it in place.
• Gently lower the broil element out of the ceiling of the oven chamber.
• Label the wires that connect to the broil element.
• Gently remove the broil element wires from the terminal block on the broil element assembly.
• To reassemble the broil element assembly, use the existing screws.
• Place the broil element into the oven chamber.
• Lift the back of the element up and reconnect the broil element wires to the terminals on the broil element assembly.
Make sure that the wires are connected to the proper terminals.
• Insert the broil element assembly into the hole in the oven ceiling while pushing the broil element wires into the access
hole toward the back.
• Hold the broil element assembly in place with one hand while replacing the existing screws that hold it in place.
• Reinstall the oven door(s) as described on page 8.
• Test the oven to ensure that repairs were properly completed.
KBE-6R2SSS_6R2SMO(SM)_프랑스향.indd 15
2014-07-18 오후 4:34:34
Содержание KBE-6R2SMO
Страница 19: ...18 7 Electrical Wiring Electrical Wiring KBE 6R2SSS_6R2SMO SM _ indd 18 2014 07 18 4 34 36...
Страница 20: ...19 KBE 6R2SSS_6R2SMO SM _ indd 19 2014 07 18 4 34 36...
Страница 21: ...20 KBE 6R2SSS_6R2SMO SM _ indd 20 2014 07 18 4 34 36...
Страница 22: ...21 KBE 6R2SSS_6R2SMO SM _ indd 21 2014 07 18 4 34 36...