Daewoo KBE-6R2SMO, Руководство по обслуживанию

Страница: 11 / 26

10
Front Door Glass Assembly
• To prevent personal injury, use gloves in case of handling glass components that are broken or shattered.
• Remove the oven door(s) as described on page 8.
• Lay the door on a flat, padded surface with the hinges facing up.
• Remove the screws in the bottom edge of the door. The outer screws on the bottom of the door are part of the hinge
assembly.
• Grasp the top end of the door with one hand and pull up. Pull the door handle out from underneath.
• Holding the door tightly with both hands, turn it over and place it on the flat, padded surface with the front door glass
facing up.
• If the door gaskets or hinges require replacement, replace them while the front door glass is removed (depending on the
oven models)
• Make sure that the door spacers in the top corners of the door are still in place before putting the front door glass back into
in place.
• Holding the door tightly with both hands, turn it over and place it on the flat, padded surface with the door gasket facing up.
• To reinstall the door handle, grasp the top end of the door with one hand and pull up. Hold the handle in position on the
front. Lower the door onto the padded surface.
• Replace the screws in the bottom and of the door and tighten into place. Do not over-tighten the screws because the door
glass could crack.
• Reinstall the oven door(s) as described on page 8.
(KBE-6R2SSS only.)
KBE-6R2SSS_6R2SMO(SM)_프랑스향.indd 10 2014-07-18 오후 4:34:26