Daewoo KBE-6R2SMO, Руководство по обслуживанию

Страница: 17 / 26

16
Temperature Sensor Removal
• Remove the oven door(s) as described on page 4.
• Remove the oven racks from the oven chamber.
Rack Support Removal
• Remove the screws that hold the rack support (on the appropriate side) in place. Be careful not to scratch the inside
surface of the oven when removing it.
Temperature sensor removal
• Remove the screws that hold the temperature sensor in place.
• When removing the temperature sensor, pull the wires attached to the sensor gently toward you through the hole in the
back of the oven to expose the connector. Do not pull hard on the wires because the connector may come loose inside the
oven wall. use a screwdriver, if necessary, to move the insulation around behind the hole to allow the connector to slide
out into the oven chamber.
• Disconnect the temperature sensor wires at the connector and remove the temperature sensor.
• When reinstalling the temperature sensor, gently push the connector and excess wire through the access hole and
insulation at the back of the oven.
• Tighten the temperature sensor into place with the existing mounting screws.
KBE-6R2SSS_6R2SMO(SM)_프랑스향.indd 16 2014-07-18 오후 4:34:35