Daewoo KBE-6R2SMO, Руководство по обслуживанию

Страница: 24 / 26

23
9. ERROR CODES
Displayed Error
Message
Description
/ Failure Criteria
Software Logic Description Solution
Er-1
temperature sensor open circuit all load stopped working (1) turn off the power, 1
minute later, turn on the
power, checked whether
display error code or not.
(2) turn off the power, open
the oven to check whether
the wire connection is good
or not, and reconnect them
well. (3) Change the sensor
or PCb display board.
Er-2
temperature sensor short circuit all load stopped working
Er-3
Meat probe short circuit all load stopped working
Er-4
oven center temperature is higher than
300 C degree
Cooking mode canceled and
return to standby mode, the
door lock activated,cooling
fan working in high speed,
then cooling fan change to
low speed and stopped.
(1) Press the CanCeL
button to see whether
display error code or not.
(2) Close the oven door,
wait about 10 minutes to
cool down oven center
temperature, and then press
the CanCeL button.
Er-5
While in Pyrolytic mode, 10 minutes after
oven center temperature reached 200°C,
if the temperature is still lower than 270°C,
then return to standby mode with er-5
displayed.
Er-6
While in Pyrolytic mode, within 2 minutes,
the relay for the door lock will started and
door will be locked, after the door is locked,
the relay will be off.
If the door lock still haven't been locked
in case oven center temperature is higher
than 300°C, all the heating element will be
stopped, the relay will stop working.
KBE-6R2SSS_6R2SMO(SM)_프랑스향.indd 23 2014-07-18 오후 4:34:37