Daewoo DWF-7588TE, Руководство по обслуживанию

Страница: 12 / 34

19 18
3 3
Procedure of Washing (Washing machine does it automatically).
SPIN SPIN SPIN Water inlet and
wash for 18 minutes RINSE RINSE
SPIN SPIN SPIN
Water inlet and
wash for 14 minutes
RINSE RINSE
SPIN SPIN SPIN Water inlet and
wash for 6 minutes
START/HOLD
RINSE RINSE
Buzzer signal to
notify you can put
the sensible
clothes into the
diluted water with
Dry-10.
The washing program is processed by your desired items.
Artificial brain computer controls full procedure proper to wash load automatically.
A part of dotted line is decreasing rotation velocity.
Because protect clothes from damage.
RINSE RINSE SPIN SPIN SPIN
Water inlet and
wash for 4 minutes
START/HOLD
SPIN SPIN
Water inlet and
wash for 10 minutes
RINSE
SPIN Water inlet and
wash for 18 minutes RINSE SPIN SPIN RINSE
SPIN SPIN SPIN
Water inlet and
wash for 18 minutes
RINSE RINSE
SPIN SPIN SPIN
Water inlet and
wash for 14 minutes
RINSE RINSE
R L R L R L
Buzzer signal to
notify you can put
the sensible
clothes into the
diluted water with
Dry-10.
After Washing : Close the water tap and separate it from the inlet-hose.
If not so, the autovalve is out of order by the water pressure.
Take off plug.
A part of dotted line is decreasing rotation velocity.
Because protect clothes from damage.
A heavy course‘s water flow is
A blanket course‘s water flow
7. DIRECTIONS FOR DISASSEMBLY AND ADJUSTMENT
GEAR MECHANISM ASS’Y REPLACEMENT
WARNING
BEFORE ATTEMPTING TO SERVICE OR ADJUST ANY PART OF THE WASHING MACHINE,
DISCONNECT THE POWER CORD FROM THE ELECTRIC OUTLET.
NOTE : To assemble the gear mechanism ass’y, reverse the disassembly procedure.
•
Raise the top plate on the outer cabinet.
•
Loosen four screws mounting outer tub cover and
remove outer tub cover from the tub ass’y.
•
Remove the spinner shaft flange nut by using ‘T’
type box wrench.
•
Lay the front of the washer on the floor.
•
Remove four bolts mounting the plate-gear protect
by using a box wrench and remove plate-gear
protect.
•
Remove the V-belt.
•
Loosen the pulsator mounting screw and remove
the pulsator.
•
Remove the tub ass’y.
•
Remove four bolts mounting the gear mechanism
ass’y by using a box wrench.
•
Pull out the gear mechanism ass’y.
Outer tub cover
Pulsator
Mounting screw
Mounting
screw
“T” type box
wrench
Mouting bolt
Gear mechanism
ass’y
Mounting bolt
Washer Pulsator
Insert-pulsator
Washer-spin
shaft fixing
Nut-spin
shaft fixing
Nut-spin shaft fixing
Tub ass’y
End of
washing
informed by
buzzer.
After 10
minutes
later from
the end of
the washing
the power
switch is
turned off
automatically.
R R R L L L