Daewoo DW-3000 Series, Руководство по обучению

Страница: 30 / 75

Concerning Drainage(Pump Model)
Problem Cause Solution
The Drain Hose is too
high Hang the Drain Hose
lower
Impurities are obstructing
drainage
Impurities are obstructing
drainage
Remove impurities
Adjust Wash Timer for
adequate draining time
Defective wiring Reconnect wiring
Defective Pump motor Replace Pump Motor
Defective wiring Reconnect wiring
Defective Spin Timer Replace Spin Timer
Defective Pump Motor Replace Pump Motor
Refer to the item on
Drainage
Defective wiring Rewiring
Defective Pressure Switch Replace Pressure Switch
Check Point
Is the height of the drainage area
where the Drain Hose hangs over
1m?
Disassemble Agitator and
take out impurities in Drain
Strainer
Are there impurities in the Valve
Housing or Inlet Joint?
Remove impurities or
replace Valve Housing or
Inlet Joint
Impurities are blocking the
Drain Hose
Is the Wash Timer OFF when the
Drain Selector is in the DRAIN
position? Pump Motor does not
work because Power is
open
Drainage
is not
satisfac-
tory
Are there impurities in the Drain
Strainer?
Is the pump Motor wiring properly
connected?
Draining
does not
function
during
drain
selecting
Are the wiring of the Spin Timer
and the Pump Motor good?
Pressure Switch does not
turn ON due to air
leakage
Stop a leak with sealing
bond
Is there air leakage at airtube?
Water
flows over
the Wash
Tub
during
wash
Is the Spin Timer's contact good?
Draining
does not
function
during
Spin
drying
Is it draining properly during the
DRAIN mode?
Are the terminals and wiring of
the Pressure Switch properly
assembled?
YES
NO
NO
YES
NO
YES
YES
NO
NO
NO
NO
NO
NO
YES
YES
YES
YES
NO
YES
2
7