Daewoo DW-3000 Series, Руководство по обучению

Страница: 44 / 75

Function DWF-100M's,100C's,1098's DWF-900's, 160's, 170's, 174W's DWF-750's, 800's
Door open It is same with above "UE" mode. "LE" mode is shown.
Checking "LE" This function mainly is to be used when Spin process, because if Lid is in opened-status when Spin mode
(Lid Error) it will cause a very dangerous situation like a customer's casualties.
If the Lid is opened when Delay(Reservation) course, also "LE" signal is shown.
The reset method is just to close Lid.
Water supply This is similar to "OE" signal. The Micom count the time of filling water from reset point to trip point.
Checking "IE" If the time is over 1 hour, PCB display "IE" signal with If the time is over 30 minute,
(Input Error) buzzer ringing PCB display "IE" signal with
buzzer sound
Checking point here is tap water pressure, connection of hot/cold valve and water tap properly.
The reset method is open Lid and close and then press the Start/Hold button.
Operation status of water valve per each process.
hot
selected water temp. washing process
cold
cold warm cold + hot
hot
rinse process
cold cold cold
41