DAELIM S2-250, Руководство по обслуживанию

Страница: 98 / 201

8-11
LH. CRANKCASE COVER/CONTINUOUSLY VARIABLE TRANSMISSION
CLUTCH/DRIVEN PULLEY ASSEMBLY
●
Clean the pulley faces and remove any grease from
them.
●
Apply frease to the O-ring and install them onto the
moveable driven face.
●
Install the movable driven face onto the driven face.
●
Apply grease to the guide rollers and guide roller pins
and then install them into the holes of the driven face.
●
Install new seal collar.
●
Remove any excessive grease.
●
Tighten the drive flate nut temperily.
●
Set teh tool invise and righten the drive plate nut to the
specified torque.
TORQUE VALUE : 4.9~5.88kgf
·
m
·
Be sure to clean the driven face off any grease.
·
Set the driven pulley assembly, driven face spring
and clutch assembly onto the clutch spring
compressor
MOVABLE DRIVEN FACE
DRIVEN FACE
O-RING
GUIDE PIN
OIL SEAL
LOCK NUT WRENCH
LOCK NUT
CLUTCH SPRING
COMPRESSOR