DAELIM S2-250, Руководство по обслуживанию

Страница: 153 / 201

●
Apply the silicone grease to the boot.
●
Connect the boot to the portion of the caliper.
●
Install the pad spring in the caliper.
●
Install the caliper pin bolt and the slide pin in the
caliper.
●
Install the brake pad and the hanger pin in the caliper.
●
Install the front caliper to the front fork
●
Tighten the bolt to the specified torque.
TORQUE VALUE : 3.0kgf
·
m
●
Connect the brake hose to the caliper and install 2
sealing washers and oil bolt.
●
Tighten the oil bolt to the specified torque
TORQUE VALUE : 3.4kgf
·
m
●
Fill the brake fluid to the upper limit line and bleed air.
FRONT FORK
REMOVAL
●
Remove the following parts.
-
Front under cover
-
Front brake caliper
-
Front fender
-
Front wheel
●
When removing the front fork, loosen the fork pipe
bolt lightly.
●
Loosen the 4 setting bolts securing the RH./LH. front
fork, remove the RH./LH. front fork.
●
After removal of RH. front fork, loosen the flange bolt
and remove the front brake hose clamp A.
14-14
FRONT WHEEL/FRONT FORK/STEERING/BRAKE
·
Support the vehicle securely under the engine not to
turn over it.
·
Loosen the fork pipe bolt, but do not remove it.