DAELIM S2-250, Руководство по обслуживанию

Страница: 28 / 201

2-5
INSPECTIONS / ADJUSTMENTS
AIR CLEANER
●
Loosen the 6 screws securing the air cleaner case cover,
remove it.
●
Loosen the 2 screws securing the air cleaner element
holder, remove it.
VALVE CLEARANCE
●
Remove the cylinder head cover.
SPARK PLUG
●
Remove the plug maintenance cover.
●
Remove the spark plug cap and disassemble the plug.
●
Check the plug for damage, contamination or deposits.
●
If the spark plug is severely contaminated or damaged,
raplace with a new one. If the plug can be reused after
removing only the carbon, use plug cleaner and wire
brush to clean the plug.
●
Always use a feeler gauge to check the gap.
GENUINE PLUG : DPR7EA9
SPARK PLUG : 0.9~1.0mm
TORQUE VALUE : 1.47~1.96kgf
·
m
●
Remove the air cleaner element.
●
Wash away any accumulated dust or dirt, by gently
squeezing it in non flammable or high flash point
solvent.
•
Using gasoline or low flash point solvents for
cleaning parts may result in a fire or explosion.
•
Make sure there is no dirt or debris on the seat of the
spark plug hole before inserting the spark plug.
•
To prevent damage to the cylinder head, hand-
tighten the spark plug before using a wrench to
tighten to the specified torque.
•
Do not overtighten the spark plug.
CHECK GAP,
DEPOSITS 0.6 ~ 0.7mm
CHECK FOR
CRACKS
CHECK WASHER
FOR DAMAGE