DAELIM A-FOUR -, Брошюра

Страница: 31 / 67

29
<CHECK>
If the oil is low, the oil warning indicator
will turn on. Turn the main switch to ON
in order to check whether the oil warning
indicator switches on. If it does, put oil in
the oil tank.
<HEADLIGHT, TAILLIGHT>
Start the engine and make sure the lights
turn on. Also check to see if the lights are
damaged or if there is dirt on them.
<BRAKE LIGHT CHECK>
Turn the main switch to ON.
While separately operating the front and
rear brakes, check to see if the brake light
turns on. Also check to see if there is any
damage to the lens or if there is dirt on the
brake light.
<WINKER CHECK>
Turn the main switch to ON.
Check to see if all the winker in the front
and rear of the vehicle(including left and
right sides) are flashing properly. At the
same time, check to make sure that the
automatic sound signal of the winker is
working. Check also to see if any of the
lens are damaged or dirty.
●
Make sure to stop engine and stay
away from fire when refueling.
●
Do not fill gasoline past the level
plate. Gasoline may leak out of the
fuel tank when replacing the fuel
tank cap if too much gasoline is put
in the fuel tank.
●
Don’t fill low grade gasoline.
Using it can cause damage (bending,
getting worn, etc.) to combustion
chamber and parts of fuel.
●
Do not close the fuel cap with
excessive strength. It may cause the
damage of the cap and the rubber
packing resulting in the leak of fuel
and may cause fire in case of
electrical short or the overturn of the
vehicle.
●
If oil or water enter the fuel tank, the
vehicle may not be started.
●
If the fuel is leaked by rupture of the
fuel hose due to the aging of the
hose, fire can be occurred.
Accordingly, check the hose
periodically for the condition.
●
Do not allow the engine to stay at a
low level. The engine will become
severely damaged if the vehicle is
driven while the oil warning
indicator is on.
ENGINE OIL CHECK
OIL WARNING INDICATOR